Slurry-residue dryer

  • Capacity(kg/h): 800~5000
  • Power(kw): 32~165
  • Floor area(㎡): 5*14~10*20
  • Raw material moisture (%): 60±5%
  • Finished product moisture (%): 12-15%(can be adjusted)
  • Application area: Slurry-residue,Brewery,vinass,Corn husk...

We're here to help:

Easy ways to get the answers you need.

(※ Click this button to inquiry)
■ Product details
►Equipment introduction:

Slurry-residue dying machine can quickly dry the slurry-residue with 65% to 75% moisture into product with only 13% water. Coal (or biomass, natural gas, coal gas) is used as main fuel to warm the air as medium. The high temperature air flow will dry different kinds of materials in a short time. Electromagnetic speed adjustment system is used as transmission system, along with the automatic temperature controller. The product will maintain the original color, quality, taste and nutrient contents after being dried.

►Working principle:

Material Processing Procedure: The material with about 60% to 75% water will be transmitted into the stirring drum dryer by screw conveyor to be concurrently dried. The material will be raised, spread and then moved helically. It will be fully stirred and scattered by the internal stirring blades, and then warmed up, dehydrated and transmitted out of the drum. The materials that is not fully dried will have heavier weight and therefore move slowly to be further dried. All materials that are fully dried will be transmitted out by the screw conveyor. The internal vibrating cleaning device will prevent the wet material from binding on the wall of drum roller.

Air Flow Process: The air will firstly be compressed and transmitted by the blower in to the hot air furnace, and then heated to the temperature of 600 to 650 °C. The draught fan pulls the air into the dyer to heat and dehydrate the material. After exchanging the heat for 3 levels, the air will be exhausted out of the dryer in the temperature of 50 to 60 °C, and then be aspirated through the cyclone dust collector and wet dust collector to reach the discharge standard.

►Performance Features:

1.The machine can be intelligently controlled and operated with one touch. The operation parameters are automatically adjusted and controlled to keep the machine working with best performance, and ensure the product that after being dried is uniform and stable with fresh color and that no damage to the nutrient contents.
2.The internal stirring blades can fully stir and scatter the material to achieve highest efficiency on heat exchange, and improve the unit producing capacity for more than 50%, and lower the energy consumption for more than 30%.
3.Automatically decontaminate impurities and remove the iron, to prevent impurities entering the later procedures.
4.Four-wheels driven with more stable transmission and better reliability.
5.40% lower space occupation and 20% lower cost on construction investment compared with traditional drum dryer
6.Multiple lifting plate combinations with higher efficiency, can effectively adjust and control the drying process and heat distribution to achieve better heat utilization. The air exhausted has temperature lower than 50 °C
7.Rolling speed, material and hot air supply are automatically controlled, and can be adjusted and controlled according to user’s specifications on moisture and production capacity.
8.Modularized dust collector with better heat recovery configuration is safer and more environmental friendly.
9.Multiple configurations with new energy-saving models of calorifier, which are highly efficient on energy consumption, are easily controlled on power supply and easy to operate. Total energy consumption can be lowered more than 30%, and power consumption can be lowered more than 20% with lower operation cost.
 

■ Technical Data

Models

DLJG1208

DLJG1408

DLJG1610

DLJG2010/3

DLJG2210/3

DLJG2510/3

DLJG2512/3

DLJG2912/3

Daily Capacity(t/d)

33.6

40.8

58.9

131.4

145.0

167.7

204.0

247.0

Daily output(t/d)

15.6

19.2

27.7

61.8

68.2

78.9

96.0

116.2

Evaporation Capacity(t/h)

0.75

0.90

1.30

2.90

3.20

3.70

4.50

5.45

Raw Material Moisture(%)

60±5%

Dried Material Moisture(%)

12-15%( Adjustable)

Drying Temperature(℃)

350-550℃

Total power (kw)

32

40

55

95

100

125

145

165

Total Weight(kg)

15000

17000

21500

26500

28500

370000

41000

45500

Plant Space(m2)

5m*14m

5m*14m

6m*16m

8m*16m

8m*16m

10m*16m

10m*18m

10m*20m

 
Online message >>
dingli@dlbio-dryer.com +86 371 67950999

Please fill in your requirement(Especially product name,capacity)and contact information in details we will reply you in 24 hours!

Name: *
Email: *
Tel:
Message(*):