What kind of dust removal equipment for wood chips drying equipment? For now, the mainstream dust collectors for dryers are generally two types of dust collectors: electric and bag. What dust removal equipment should be matched with the wood chip drying equipment?
The sawdust dryer will generate a large amount of dust and flue gas during the drying process. To remove dust, a cyclone dust collector is required first. As for the flue gas, a bag filter can be used for processing. Of course, these two types of dust collectors are not the only choices. The specific dust removal method mainly depends on the user's requirements for cost and site. Considering which method to use for dust removal, the environmental protection requirements of the selected dust collector also need to be met. The customer's cost control and other comprehensive factors are considered.
What factors can affect the drying quality of wood chips?
Have you ever encountered wood chips drying finished product moisture is not up to standard? Have you ever encountered wood chips drying capacity not meeting expectations? Then see if these factors affect the efficiency of your sawdust dryer!
There are generally three factors that affect the quality of finished wood chips: air temperature, air humidity, and airflow rate. Next, we discuss these three main influencing factors.
Air temperature: After the material enters the dryer, it mainly relies on the increase of temperature to remove excess water in the raw material. However, this process requires a general control of the temperature. The temperature of the whole process is not static, and its control is very important.
Air humidity: The second important factor is the humidity of the air, which is directly related to the drying temperature. When the humidity in the air is too high, the drying temperature in the drum will not reach the expected effect. Conversely, if the humidity is low, the temperature will increase relatively. This will allow for better drying.
Air velocity: Air velocity is also a very important reason, and contrary to air humidity, the faster the air velocity, the better the drying effect of the material. On the contrary, it will decrease, but it is worth noting that this process must control the temperature in real-time.
