The control system of the horizontal waste paper baler is composed of 4 sets of wire devices installed on a frame. The entire wire frame is suspended on a middle shaft of the pressing frame and moves horizontally relative to the pressing frame under the action of the hydraulic motor.
The pressing frame is a welded component with wheels at the bottom. It can move horizontally along the main slide rail under the push of the hydraulic cylinder.The lifting platform is mainly composed of two horizontal beams bolted together. The lifting platform can move up and down in the vertical direction under the push of two hydraulic cylinders.The structure of the pressing frame is basically similar to that of the pressing frame, but 4 baling heads and 1 set of wire feeding device are arranged on it. The baling head of the waste paper hydraulic baler (4 in total) is a component with a complex structure and multiple action linkages of the entire equipment. The structure of each baling head of the waste paper hydraulic baler is exactly the same and can be interchanged.There are 4 sets of wire feeding devices, each set corresponds to a baling head, and each set includes a baling wire conveying device and a baling wire anti-tensioning device.The main rail seat of the waste paper hydraulic baler is mainly composed of two wear-resistant steel rails on the surface. The wheels of the compacting frame are guided to run along the outer sides of the two tracks, and the hydraulic cylinders that push the compacting frame to run are arranged in them.
In addition, in addition to the mechanical components, there is also a complete set of hydraulic stations. From the above description, it can be seen that the various movements of the waste paper hydraulic baler are completed by the power of the fluid.
The horizontal waste paper baler works by controlling the hydraulic power system with an electrical control system, driving the oil cylinder to compress the equipment's pressure plate. Four bale slots are convenient for operating three-sided bales, and single-sided feeding can avoid misoperation and injuries. It is equipped with a safety switch and an opening safety interlock mechanism. It uses high-end electrical control components, is easy to operate, and can automatically turn over the bales without debugging. The rigid pressure plate structure is convenient for recycling a variety of waste materials, compacts quickly, has low noise, and is highly efficient. When working in a non-pressure stroke, the pressure plate automatically returns to its empty position, which reduces power consumption and has a stylish appearance.
Model | 200 | 180 | 160 | |
---|---|---|---|---|
Main pressure cylinder | Cylinder | 299x2350 | 299x2350 | 273x2350 |
Nominal thrust | 2000kn | 1800kn | 1800kn | |
Stroke | 2350mm | 2300mm | 2300mm | |
Quantity | 1piece | |||
Hydraulic system operation | 28.5mpa | 28.5mpa | 28.5mpa | |
Feeding port size | 1100x1950mm | |||
Bag size(W*H*L) | 110*140*150cm | 110*130*150cm | 110*125*150cm | |
Paper bag weight | 1000x1450kg | 1000x1350kg | 1000x1250kg | |
Main equipment power | 22+22+3kw | 22+22+3kw | 22+18.5+3kw | |
Packing line | 12# iron wire/plastic rope | |||
Working mode | Electrical control | |||
Production efficiency | 6-12(bags/hour) | 5-10(bags/hour) | 5-10(bags/hour) |