A large amount of waste yeast liquid will be produced while fermenting beer in the brewery. In the past, the treatment method of the brewery was to directly discard the waste yeast liquid, but the yeast activity is extremely strong, and poor treatment will cause large-scale pollution. After continuous research, Zhengzhou Dingli invented the yeast dryer to process yeast. Yeast can be made into animal feed for use in the breeding industry after drying, without causing pollution to the environment, and it can also achieve secondary income.
The steam yeast dryer is a dryer that indirectly conducts heating to heat materials and vaporize moisture, and uses steam to heat. The drying cylinder (drum) is a metal hollow cylinder whose outer surface has been processed and has a very high surface finish. Under the drive of the transmission device, the drying cylinder rotates around the axis and the speed can be adjusted. The slurry is preheated in the preheating tank, preheated to about 50 ℃, using the feed pump to enter the dipping tank in the lower part of the drying cylinder, the drying cylinder is immersed in about 60-80mm, the outer surface of the rotating drying cylinder is coated with a The steam pressure in the uniform layer of slurry drying cylinder is 0.15-0.3Mpa, the slurry is heated on the outer wall of the drying cylinder, and the moisture is vaporized and discharged by the axial fan. After the dryer rotates for one cycle, the materials are completely dried, and the scraped materials are discharged by the scraper on the outer wall of the dryer, and they are collected at the discharge port.
Zhengzhou Dingli has mature experience in yeast dryer manufacturing technology, which can meet the special requirements of different customers, and create your own equipment one-on-one.
