How to use steam to dry sea sand? A steam drum dryer can be used to convert the waste heat steam into the heat energy required for sea sand drying to achieve the purpose of sea sand drying. It can be used for drying all kinds of sand and slag. There are many types of equipment, with an hourly output of 15 tons and 30 tons. , 50 tons, 100 tons or higher. This article introduces the steam drying process of sea sand and the price of a 100-ton sand dryer per hour.
How does steam dry sea sand
The sand is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe through the feeding machine of the hopper. The inclination of the feeding pipe should be greater than the natural inclination angle of the material, so that the material can flow into the sand dryer (yellow sand dryer) smoothly. The dryer cylinder is a rotating cylinder slightly inclined to the horizontal. The material is added from the higher end, the heating medium enters from the lower end, and it comes into countercurrent contact with the material, and there is also the heating medium and the material flowing into the cylinder together with the material. With the rotation of the cylinder, the material moves to the lower end under the action of gravity. When the wet material moves forward in the cylinder, it directly or indirectly receives heat from the heating medium, so that the wet material can be dried and sent out from the discharge end through a belt conveyor or a screw conveyor. A lifting plate is installed on the inner wall of the cylinder of the sand dryer (yellow sand dryer). Its function is to pick up and scatter the materials to increase the contact surface between the materials and the airflow, so as to increase the drying rate and promote the materials. go ahead. The heating medium is generally divided into hot air, flue gas and so on. After the heating medium passes through the dryer, a cyclone dust collector is generally required to capture the materials carried in the gas. If it is necessary to further reduce the dust content of the exhaust gas, it should be discharged after passing through a bag filter or a wet dust collector.
Price of 100 tons of sand dryer per hour
Due to the different marketing models, strengths and equipment configurations of the manufacturers, the price of 100 tons of sand dryers per hour varies greatly. As a direct selling manufacturer of sand dryers, Zhengzhou Dingli directly sends the ex-factory prices to customers. Not only that, but also the technical staff of Dingli. We can provide customers with a scientific and reasonable configuration plan for free, solve problems for each customer, and strive for less investment to obtain more benefits. You are welcome to click on the consultation at any time to obtain a 100-ton sand dryer plan and an accurate quotation.
