Screw dehydrators can be widely used for the dehydration process of high-moisture materials, such as vinasse, wood powder, pomace, medical residues, cassava dregs, and food waste. This kind of dehydrator could take off 20% to 25% moisture of the wet materials, lower the energy cost and reduce the duty of BSG dryers, which can significantly increase the output. Therefore it is necessary equipment for the drying process of high-moisture materials. The output can be directly delivered into the drying equipment, greatly lower the energy consumption for the following process.
At the working state, wet materials are conveyed into the feeding box at a steady rate and then pushed to discharge end by screw rotor blades dewatering. Under the strong extrusion force of screw and dumper regulator, wet materials complete the process of mechanical dehydration. Moisture is taken away when going through the screening mesh and exhausted at the gas discharge outlet.
|
Model |
DLLT300-1 |
DLLT300-2 |
DLLT300-3 |
|
Power（kw） |
15 |
30 |
45 |
|
Rate Range(r/min) |
125---1250 |
||
|
Weight（t） |
1.1 |
2.3 |
3.5 |
|
Output capacity (t/d) |
20~30 |
45~60 |
60~75 |
|
Footprint（m2） |
2.1 |
4.2 |
6.6 |
